With F1 being added to the Aussie Retro race series I have dug out the soldering iron and put together a F1 chassis which worked well when I tested it yesterday at Hornsby Slotcar Centre.
Some details of the chassis: -
Rails are double 0.063"
Bracket is custom built of .032" Brass
All other brass is 0.063"
Fronts are independant running in a tube
Weight as pictured is 115gms - added 4.5 gms on front when testing to give 119.5 gms total
Now some pics: -
- Bracket is beefed up with .063 brass
- IMG_3180.JPG (53.27 KiB) Viewed 5724 times
- Rattler pin tubes at front - front axle tube supported bt .063 x 0.250 brass strip.
- IMG_3181.JPG (42.69 KiB) Viewed 5724 times
- Rattler pin tubes at rear mounts
- IMG_3182.JPG (43.01 KiB) Viewed 5724 times
- Rear view showing bracket treatment
- IMG_3183.JPG (43.63 KiB) Viewed 5723 times
- Pans are plumber mounted
- IMG_3184.JPG (46.05 KiB) Viewed 5723 times
- Bottom view
- IMG_3185.JPG (43.51 KiB) Viewed 5723 times
- Ready to go - JK front and rear
- IMG_3186.JPG (54.1 KiB) Viewed 5724 times
- Truscale Lotus Wedge - in Hot Pink of course
- IMG_3189.JPG (35.12 KiB) Viewed 5723 times
