RPM weekly racing
Posted: Tue Sep 03, 2024 11:21 am
G'day everyone here is our classes with rules for our weekly club racing; Starting 9th September.
All racing will Start at 7pm with free practice from 6pm.
Our race nights are as follows:
(Depending on numbers the days and classes may be subject to change to accommodate more entries).
Monday:
Womps ( Flat Track )
Aussie Retro ( Flat track but can be run on both )
Rules as per: AUSSIE RETRO - CanAm
KC3200 brushless LMP ( King Track but can be run on both )
Hawk 9 GTP ( King Track )
Junior Hawk 25 ( Flat Track )
All racing will Start at 7pm with free practice from 6pm.
Our race nights are as follows:
(Depending on numbers the days and classes may be subject to change to accommodate more entries).
Monday:
Womps ( Flat Track )
- Steel or Brass chassis
Mid America 'Stomp' motor
80.5mm Frint and Rear
Sedan or Hot-Rod bodies
Any gearing - 48 pitch
1/8th solid Steel axles
Oilites ONLY
0.5mm Front ride height Minimum
1.0mm Rear ride height Minimum
- JK C21 chassis ONLY
Plafit Cheetah 4 motor
Any 'DTM' style body
85mm Rear width Max'
0.5mm Front ride height Minimum
1.0mm Rear ride height Minimum
3/32 or 1/8th solid Steel axles
Open gearing
Oilites ONLY
Aussie Retro ( Flat track but can be run on both )
Rules as per: AUSSIE RETRO - CanAm
KC3200 brushless LMP ( King Track but can be run on both )
- Any commercially available 'Flexi' style chassis
KC 3200kv motor ONLY
Westrock, DoSlot, +One ESC's ONLY
Open gearing (14:34 recommended)
3/32 or 1/8th Solid Steel axle
Any 'LMP' style body (Open or Closed cockpit)
85mm Rear width Max'
0.5mm Front ride height Minimum
1.0mm Rear ride height Minimum
Oilites ONLY
Hawk 9 GTP ( King Track )
- Any commercially available 'Flexi' style chassis
JK Hawk 9 or Hawk 9BB motor
Open gearing (12:37 recommended)
Any GTP style body
85mm Rear width Max'
0.5mm Front ride height Minimum
1.0mm Rear ride height Minimum
Oilites or Ball Bearings
- Any commercially available 'Group 12' Wing car chassis
JK Hawk 9 or Hawk 9BB motor
NO weight limit
Any commercially available Wing car body
Open gearing (12:37 recommended starting point)
83mm Rear width Max'
.047 Rear clearance
Oilites or Ball Bearings
Junior Hawk 25 ( Flat Track )
- Any commercially available 'Flexi' style chassis
JK, Mid America, B52 25k motor
Any 'DTM' style body
Bodies must have 3 race numbers
3/32 or 1/8th Solid Steel axle
Set gearing 13:35 64 pitch
85mm Rear width Max'
0.5mm Front ride height Minimum
1.0mm Rear ride height Minimum
Oilites ONLY
- JK C21 chassis ONLY
Plafit Cheetah 4 motor
Any 'DTM' style body
85mm Rear width Max'
0.5mm Front ride height Minimum
1.0mm Rear ride height Minimum
3/32 or 1/8th solid Steel axles
Set gearing 13:35 64 pitch
Oilites ONLY